| |
 |
 |
|
| |
|
|
|
| |
Kevipol® SF |
| |
|
|
|
| |
Kevipol ® SF is an electrifying white ink used for fast and soft (khadi) printing of Polyester, Nylon, Acrylic, Silk, Cullulosic and blended fabrics.
|
| |
|
| |
|
Advantages |
- Fast khadi print with soft feel.
- Resist and Discharge type effect.
- Half tone effects by over printing pigment, acid, disperse of reactive dyes over khadi prints.
- Easy fixation by curing, thermo fixation or high pressure steaming for certain quality.
- None to match in fastness to dry rubbing and wet rubbing.
- Easy application without chocking problem.
|
| |
|
|
|
| |
|
Application |
: Preparation of printing [khadi] paste for all type of fabrics.
|
| |
|
|
KEVIPOL®SF: |
98 to 99 Kgs. |
| |
|
|
Melamine Formaldehyde : |
1 to 2 Kgs |
| |
|
|
Resin/Fixer |
____________ |
| |
|
|
|
100 Kgs. |
| |
|
|
Mix well and filter. Print dry cure at 120°C for 2 minutes.
N.B.: [Use Urea or glycerine 1 to 2% to avoid chocking]
1.Use 100 mesh polyester or 120 mesh nylon bolting cloth for screen Printing.
2.Always take small trial of every new lot of fabric. Get it cured properly Then check dry-rubbing and wet-rubbing fastness. |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
